1. Home
  2. Products
  3. Gear Motor
  4. Low Power Gear Motor

Low Power Gear Motor

Application

The GH/GV gear motor is suitable for application in various industrial production lines as part of machinery such as conveyors, food processing machinery, medical equipment, printing machines, etc.

Technical Parameters
Ratio Output R.P.M Output Torque
0.1KW 1/8HP 0.2KW 1/4HP 0.4KW 1/2HP 0.75KW 1HP 1.5KW 2HP 2.2KW 3HP 3.7KW 5HP
Hz
50 60 50 60 50 60 50 60 50 60 50 60 50 60 50 60
3 500 600 0.19 0.16 0.37 0.31 0.7 0.6 1.3 1.1 2.6 2.2 3.8 3.2 6 5.5
5 300 360 0.31 0.26 0.62 0.52 1.2 1 2.2 1.9 4.5 3.8 6.72 5.6 11 10
10 150 180 0.62 0.52 1.24 1.04 2.4 2 4.5 3.8 9.1 7.6 13.7 11.2 22 20
15 100 120 0.91 0.76 1.8 1.5 3.6 3 6.8 5.7 13.5 11.3 20.1 16.8 32.6 29.8
20 75 90 1.2 1 2.4 2 4.8 4 9 7.5 18.1 15.1 26.8 22.4 43.6 36
25 60 72 1.4 1.2 3 2.5 6 5 11.2 9.4 22.6 18.9 33.6 28 53.9 49.53
30 50 60 1.8 1.5 3.6 3 7.2 6 13.5 11.3 27.1 22.6 40.3 33.6 64.7 58.8
40 37 45 2.2 1.9 4.6 3.9 9.3 7.8 17.5 14.6 34.9 29.1 52 43.4 86.3 78.4
45 33 40 2.7 2.2 5.4 4.4 10.9 9.1 20.6 17 41.1 34 59.8 49.6 98.5 81.7
50 30 36 2.8 2.4 5.7 4.8 11.6 9.7 21.9 18.3 43.6 36.4 65.1 54.3 107 97
60 25 30 3.4 2.9 6.9 5.8 13.9 11.6 26.2 21.9 52.4 43.7 78.1 65.1 127 115
70 21 25 4.3 3.6 8 6.8 16.2 13.5 31.5 26.3 62.4 52 92.5 77.1
80 19 23 4.8 4 9.2 7.7 18.4 15.4 35.5 29.6 70.8 59 105 87.5
90 17 20 5.2 4.4 10.3 8.6 20.7 17.3 39.3 32.8 77.1 64.3 113 94.3
100 15 18 5.8 4.9 11.5 9.6 23 19.2 53.2 36 83.7 69.8 126 105
120 12 15 6.9 5.8 13.8 11.5 27.7 23.1 51.8 43.2 101 83.7
140 11 13 8 6.7 16 13.4 32 26.7 59.7 49.8 116 96.8
160 9 11 9.1 7.6 18.3 15.3 36.3 30.3 68 56.7 132 110
180 8 10 10.3 8.6 20.7 17.3 40.8 34 76.8 64 148 123
200 7 9 11.6 9.7 22.9 19.1 43.2 36 82.8 69
Overhang Load of Output Shaft
Ratio Output R.P.M Overhang Load of The Output Shaft
0.1KW 1/8HP 0.2KW 1/4HP 0.4KW 1/2HP 0.75KW 1HP 1.5KW 2HP 2.2KW 3HP 3.7KW 5HP
Hz
50 60 50 60 50 60 50 60 50 60 50 60 50 60 50 60
3 500 600 30 25 30 25 54 45 60 50 145 130 165 150 200 180
5 300 360 36 30 36 30 78 70 85 75 165 150 210 180 270 225
10 150 180 70 60 70 60 150 130 180 150 280 250 430 360 570 550
15 100 120 110 90 110 100 175 160 165 160 355 348 490 450 780 750
20 75 90 150 125 135 125 190 170 175 170 369 365 540 500 850 830
25 60 72 155 140 150 140 210 180 185 180 450 430 650 630 1100 1050
30 50 60 160 150 170 165 235 220 415 400 480 450 690 650 1200 1100
40 37 45 160 160 180 180 270 260 430 420 580 550 710 670 1280 1200
45 33 40 170 170 180 180 335 328 440 430 590 570 820 780 1300 1250
50 30 36 170 170 180 180 350 335 450 440 600 580 850 820 1400 1350
60 25 30 180 180 180 180 350 350 450 450 630 610 900 900 1400 1400
70 21 25 180 180 180 180 350 350 460 460 670 650 1100 1100
80 19 23 180 180 180 180 350 350 460 460 680 680 1100 1100
90 17 20 180 180 180 180 350 350 500 500 850 850 1200 1200
100 15 18 200 200 250 250 380 380 590 590 900 900
120 12 15 200 200 320 320 390 390 640 640 920 920
140 11 13 200 200 320 320 400 400 679 679 920 920
160 9 11 220 220 330 330 420 420 679 679 950 950
180 8 10 220 220 330 330 420 420 700 700 920 920
200 7 9 240 240 350 350 430 430 720 720 980 980
1/250-1/1800 240 240 350 350 430 430 720 720
300 300 480 480 720 720 1400 1400
Features of AC Gear Motor

1. Small size, light weight, low noise, compact, maintenance-free
2. The geared motor output section has seals to prevent grease refluxing and damage
3. High efficiency thanks to the silicon steel stamping die, high precision core, strong magnetic properties and a geared motor cooling structure.
4. We can provide customized motor designs at your request.

Model Selection

Installation method: Horizontal (foot) installation, Vertical (flange) installation
Requirement for the output shaft of motor: 18, 22, 28, 32, 40,50mm
Power requirement: 100W, 200W....3700W
Speed of the motor you need
Ratio: Motor input speed/output speed. Or your required output speed. We have 3,5,10...1800
Voltage: Three phase 220V/380V 50/60Hz; Single phase 110, 220V 50/60Hz
Additional parts: DC 90V brake unit; Hand release brake unit; DC 24V brake unit, 110V forced draft fan; 220V forced draft fan.
Position of terminal box: view from output shaft
Wire inlet direction

Details

The assembly of the gear, shaft and bearing are integrated. The bearing uses a thin oil that lubricates the components by light splashing during rotation. In order to prevent grease loss and from dust contaminating the box, the sealing element is installed between the bearing end cap and extended shaft.
The gear motor housing is an important component as it is the base of the transmission component. It has plenty of strength and rigidity to get the job done. The housing is made mostly form gray cast iron because of its vibration damping effects and strength. The overload or impact load gears are made from cast steel.
Accessories of gear motor: In order to ensure optimal operation of the gear motor, the lubrication system should be maintained properly. Pay attention to the oil sump, oil injection system, oil drain and level. Accurate positioning is also recommended.

Precautions for Use

Installation and Maintenance
1. Please inspect the appearance of the gear motor for any oil leakage or other visible damage.
2. Please confirm the working voltage of gear motor, a voltage regulator can be added when voltage is unstable.
3. Please make sure the purchased gear motor specification conforms to the designated specification.
4. Check the fixed motor base to avoid loosing when transmission.
5. Please install the accessories like chain wheels, belt pulleys, couplers etc. according to the relevant provisions.
6. Lubrication oil was already filled, no need change grease oil within 12000 hours.
7. The rated current shouldn’t exceed the current value marked on the motor nameplate.
8. Please pay attention to the surrounding temperature, humidity and PH value.
9. Working temperature is -10 degree to+40gegree, humidity is below 90%.
10. If gear motor is not installed, maintained or operated as per a correct way, the gear motor will be heavily damaged.

How to store the reducer?
1) Keep the reducer in a clean dry place.
2) If it will be stored outdoor or in a humid place, please put the reducer in a box and pack it tightly with a plastic bag to avoid rain exposure and external erosion.

Cautions during Operation
1) Overload should be avoided.
2) Input speed cannot exceed the proper max. speed.
3) Please stop and check the reducer if any of the following occurs:
Sudden temperature rise
Abnormal noise
Unstable speed
4) Please change the motor shaft direction after stopping the motor.

Warranty Instruction
The following costs and damages are not included in our warranty:
1) Freight cost
2) If the reducer connects with or inserts into a unit during dismounting or mounting, or any other extra action, there will be a cost as this is not in the warranty.
3) Other accompanying unspecified damage.

Download

Parameter list of low power gear motor
Information of low power gear motor

Inquiry Form

Add: No. 4777, North Jiasong Road, Jiading District, Shanghai, China-201804
Tele: +86-21-69009655 69009656
Fax: +86-21-69009657
Mobile:
+86-15900414247 (Ms.Jessica Gan)
+86-18602189255 (Mrs.Lusia Cai)
Email:
servo-gearbox@foxmail.com
tqgmotor@hotmail.com
fhtgearbox@hotmail.com
Skype: fht-gearbox@outlook.com
Skype: lusialsz
WhatsApp:008615900414247
WhatsApp:008618602189255
Wechat: tq15900414247
Wechat: lusiacrusher
QQ:
3001056826
3285580860
3002249317
3215796644