1. Home
  2. Products
  3. Bevel Steering Gearbox

Bevel Steering Gearbox

Application

The T-series bevel gear box is used for a variety of purposes, including:
· Side transmission
· Lifting equipment – Left and right output is achieved using one reducer, and after steering, synchronous lifting is achieved
· Mechanical parking systems- one reducer drive powers the left and right chain wheels to synchronously run
· Game machine- one vertical shaft inputs, while the double horizontal shaft runs in reverse
· Packing machines

Features

1. This series of gear boxes has been designed to have a standard structure and design across the various types and ratios. Ratios include 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, and 5:1. The gearboxes are known for their outstanding efficiency.
2. Gearbox options include single horizontal shaft, double horizontal shafts, single vertical shaft, and double vertical shaft structures.
3. A spiral bevel gear can rotate both forward and reverse, allowing for a stable transmission at high and low speeds. The gear features little to no noise, a low vibration rate, and a heavy load bearing capacity.
4. When the ratio is not 1:1, the horizontal shaft brings an input or the vertical shaft brings an output performance, the speed of the gear box increases.

Details

1. Case: High rigidity FC-25 cast iron
2. Gears: The material used in the gears is a high quality, high purity steel alloy (20CrMnTiH) that has undergone a carburizing, quenching and grinding process.
3. Main shaft: The main shaft uses a steel alloy for tempering and features a high hanging load capacity
4. Bearing: Heavy load capacity taper roller bearing
5. Oil seal: The oil seal has double sealing lips, ensuring it is dust and oil leak resistant.

T series Gearbox Transmission Capacity Table
Ratio Input Speed (r/min) T10 T12 T16 T20 T25
Rated Output Torque (N.m) Input Power (KW) Rated Output Torque (N.m) Input Power (KW) Rated Output Torque (N.m) Input Power (KW) Rated Output Torque (N.m) Input Power (KW) Rated Output Torque (N.m) Input Power (KW)
1:1 1450 421 65.3 619 96 1019 163
1150 453 55.7 665 81.1 1098 139 1842 234
870 479 44.6 726 67.5 1186 114 2009 193 3489 335
580 493 30.6 802 49.7 1343 85.9 2274 145 3940 252
400 504 21.5 821 35.1 1499 66.1 2538 112 4410 195
300 513 16.4 835 26.8 1637 54.1 2744 90.8 4792 159
200 521 11.1 852 18.2 1784 39.3 3126 69 5390 119
100 535 5.72 875 9.36 1843 20.3 3205 35.3 5439 60
10 561 0.599 919 0.983 1940 2.14 3205 3.53 5713 6.3
1.5:1 1450 374 38.7 564 58.3
1150 380 31.2 601 49.2
870 389 24.1 656 40.7
580 396 16.4 699 28.9
400 406 11.6 711 20.3
300 411 8.78 724 15.5
200 417 5.95 736 10.5
100 426 3.04 754 5.37
10 443 0.316 785 0.56
2:1 1450 305 23.6 516 40 921 73.7 1578 126
1150 309 19 516 31.7 938 59.5 1607 102 3146 199
870 315 14.6 516 24 958 46 1646 79 3224 155
580 322 10 524 16.3 980 31.3 1695 54.2 3332 107
400 328 7.02 538 11.5 1000 22 1725 38 3420 75.4
300 322 5.33 543 8.71 1009 16.7 1754 29 3479 57.5
200 338 3.61 551 5.89 1029 11.3 1784 19.7 3557 39.2
100 344 1.84 563 3.04 1058 5.84 1833 10.1 3646 20.1
10 357 0.191 586 0.313 1098 0.605 1921 1.06 3822 2.11
2.5:1 1450 293 18.2 507 31.4
1150 298 14.7 514 25.3
870 302 11.2 523 19.5
580 310 7.68 535 13.3
400 315 5.38 545 9.32
300 317 4.06 552 7.08
200 321 2.75 560 4.79
100 326 1.4 568 2.43
10 336 0.144 588 0.251
3:1 1450 270 14 458 23.6 904 48.2 1529 82.3 2935 158
1150 275 11.3 464 19 920 38.9 1561 66.6 3045 130
870 279 8.66 469 14.6 940 30.1 1598 51.6 3135 101
580 285 5.89 480 9.92 960 20.4 1644 35.4 3246 69.9
400 288 4.11 490 6.98 978 14.4 1672 24.8 3317 49.3
300 291 3.11 495 5.29 990 10.9 1701 18.9 3372 37.6
200 294 2.1 501 3.57 1005 7.38 1733 12.9 3449 25.6
100 300 1.07 510 1.82 1038 3.8 1777 6060 3537 13.1
10 308 0.11 527 0.188 1076 0.4 1865 0.69 3713 1.4
4:1 1450 241 9.35 434 16.8 850 34.3 1452 58.7 2798 113
1150 246 7.54 441 13.5 865 27.7 1483 47.5 2892 92.6
870 249 5.78 448 10.4 884 21.4 1518 36.8 2978 72.2
580 254 3.93 456 7.07 902 14.6 1562 25.2 3084 49.8
400 257 2.74 465 4.97 919 10.2 158 17.7 3151 35.1
300 259 2.08 470 3.77 930 7.8 1616 13.5 3204 26.8
200 262 1.4 476 2.54 944 5.3 1646 9.17 3276 18.2
100 267 0.71 485 1.3 976 2.7 1688 4.7 3360 9.36
10 275 0.07 501 0.13 1011 0.3 1772 0.49 3527 0.98
5:1 1450 136 4.21 296 9.18 814 26.3 1391 44.9 2631 85
1150 138 3.39 301 7.39 828 21.2 1420 36.4 2771 71
870 140 2.6 305 5.68 847 16.4 1454 28.2 2853 55.3
580 143 1.77 311 3.86 864 11.2 1496 19.3 2954 38.2
400 144 1.23 318 2.72 881 7.85 1521 13.6 3018 26.9
300 146 0.93 321 2.06 891 5.96 1548 10.3 3069 20.5
200 148 0.63 325 1.39 905 4.03 1577 7.03 3138 14
100 150 0.32 331 0.71 935 2.08 1617 3.6 3218 7.17
10 155 0.03 342 0.07 969 0.22 1697 0.38 3378 0.75
Installation & Maintenance

Notes before Installation
1. Clean out the shaft and inspect it for dirt or rust before using it in the gearbox
2. Working temperature: 0 -40°C
3. Ensure the mating dimensions of the hole for steering gearbox connection meets all requirements.
4. Change the stopper to vent the plug at its highest position before using the gearbox. This ensures the steering gearbox can efficiently vent gas from the body during operation.

Installation
1. The steering gearbox should only be mounted on flat, vibration resistant and torsion resistant support structures.
2. Do not knock the belt pulley, coupler, small gear or chain wheel into the output shaft using a hammer. This prevents bearing and shaft damage.

Operation and Maintenance
1. Inspect the steering gearbox to ensure it remains flexible after installation. Carry out a non-load test before the first time usage, then gradually add a load under normal operating conditions.
2. Do not use the steering gearbox with loads that exceed acceptable levels.
3. Check the oil level before and during usage. Lubricating oil should already be in the gearbox before delivery.

Oil Change Rules
First oil change: The first oil change should be carried out after 300 to 400 hours of operation. After that, change the oil after every 1500-2000 hours of operation.
The lubricating oil should be inspected every two weeks, especially under harsh operating conditions to ensure temperatures are within the normal range and the gearbox remains dust free. Once dirt or other impurities are found in the oil, change it. Keeping the lubricating oil clean extends the service life of the steering gearbox and increases economic benefits.

1. How do I store the gearbox?
1) Keep the reducer in a clean and dry place.
2) If it will be stored outdoors or in a humid location, place the reducer in a box and pack tightly with a plastic bag around it to prevent moisture buildup and external erosion. For added protection, take condensation and rust prevention measures.

2. Cautions
1) Do not overload.
2) The input speed should never exceed the allowable maximum speed.
3) If the following occurs, stop and check the gearbox immediately:
· Sudden rise in temperature
· Sudden abnormal noises
· Sudden change in speed

3. Warranty Instruction
The following costs and damages are not included in our warranty:
1) Freight cost
2) If the reducer connects with, or is inserted into the unit when dismounting or mounting the unit, or other unnecessary actions, there will be added costs.
3) Damage caused by improper usage
4) Other derivative and accompanying damages

Download

T Series Bevel Gearbox Transmission Ability
Bevel gearbox information

Inquiry Form

Add: No. 4777, North Jiasong Road, Jiading District, Shanghai, China-201804
Tele: +86-21-69009655 69009656
Fax: +86-21-69009657
Mobile:
+86-15900414247 (Ms.Jessica Gan)
+86-18602189255 (Mrs.Lusia Cai)
Email:
servo-gearbox@foxmail.com
tqgmotor@hotmail.com
fhtgearbox@hotmail.com
Skype: fht-gearbox@outlook.com
Skype: lusialsz
WhatsApp:008615900414247
WhatsApp:008618602189255
Wechat: tq15900414247
Wechat: lusiacrusher
QQ:
3001056826
3285580860
3002249317
3215796644